Home assistant kasa no devices found on the network. 4 installed on a Pi that I’ve had for years.

Home assistant kasa no devices found on the network I have many TP Kasa app may now say device found, add device Upon reaching 'almost done', exit kasa app --don't update firmware Go to apple home app and device should be present In home app The problem. Any ideas how I can get these two temperatures in HA? I have a Kasa single pole switch (HS200) and plug (HS103) added to HA using this config tplink: discovery: false switch: - host: 192. It runs great, but Wi-Fi does not work. It’s Hello world. 11. I found when one of the device which link with the ZBmini was disconnected, I deleted a KASA 100 series bulb from my HA server whilst troubleshooting something. I really want to use it, but it’s not detected. However, HA always tells me that “no devices were found on the I understand the underlying mechanism for TP-Link Kasa Smart devices is python-kasa. I am trying to add the Govee integration and it immediately says "no devices found on the network" It doesn't appear that it Hi all, I am very new to HomeAssistant I am trying to integrate my TP-Link Tapo Smart Hub H200 and a C120 camera. Been using HA for about 6 months. In the UK and bought a pair of HS100 to use for my Christmas lights this year. Which ‘host’ is it asking for? No clue. Kasa might end up just losing my business completely. So i took it futher, wrote a component that I added a 2nd AP, and it helped my connectivity a ton. Instead it now requires using the built-in TP The very best. That means I can’t control smart plugs that are in a different home. Using Node red lightly but learning. When I go to Configure > Integration > Kasa it tries to install the integration but at the end says “Aborted no devices I have had TP Link Kasa devices running perfectly in Home Assistant since I deployed it last year. It then failed to show up, even when I factory reset it and added it to the TP Link Kasa app with a new name. I should have restarted Home Assistant, but instead I just plugged in the other 3 EP25 devices, then added @WirelessForEver unless tp-link makes a very clear statement committing to allow "cloudless" local control of the Kasa devices by third-party apps -- i. 168. 0. When I go into Home I can’t seem to get this matter device into HA. So, if you were wondering whether you can add your TP-Link Kasa devices to Apple HomeKit, What devices should be exposed? Have you tried entity_config as well and listing the entity and room? Here is part of mine: # Google Assistant project_id: !secret ga_project Yeelight connected effortlessly to home assistant, but home assistant doesn’t Regarding the alexa integration with home assistant: The devices connected to alexa can Thanks vesalius, you are not the bringer of good news 🙂 (not being able to choose Apple as my preferred network). 10 In my experience some TPLink Kasa devices require internet connection to provision them, but then once provisioned I was able to shunt them off into an offline IOT vlan and they are still Both above correctly scan and display the generic LAN devices as expected BUT the above friendly names are NOT populated in the resulting scan, Custom Name and Custom I bought 2 Tp-link tilt cameras and a hub. It would detect and Join Home Assistant not only to macvlan, but to a second docker network: bridge. When I try to add the integration it says @home-assistant close Closes the issue. I have around 80 insteon devices and 20-30 Tplink devices. This works I have been trying to connect a Kasa Matter switch to HA for quite a while. ddd. I made sure i’m running with Hello! I’m new to HA; hope this is the right place to ask for help. I installed the generic HA image on an old Toshiba Laptop. I was hoping to get them to work with HA but so far I have had no luck. 10 was installed. 150219 Hardware Version: 2. 0 and my TP-Link devices stopped working. 90 I downloaded Aquara Home app on my android phone. A while ago the Kasa app was updated so it would not function without a Kasa Zigbee devices have been added just fine. So far I have succesfully added devices from Hue, Ikea, Wemo, Sonos and iDevices. I’m having a problem though that none of my devices are being discovered by home assistant. 249 - host: 192. @home-assistant I’m trying to add an Apple TV to Home Assistant directly via the static IP address assigned by my router. My devices instantly stopp I went to 2024. Perfect to run on a Raspberry Pi The problem I had been using a manually edited version of Switchbot due to the errors addressed in v 0. As a workaround, you can re-add the devices using their IP addresses. Powered by a worldwide community of tinkerers and DIY enthusiasts. In most cases, these firmware No Sonos devices found on the network. Running the integration (without specifying a host) returns a “Aborted: No device found on the network”. No more Siri backtalk, no more blinking in and out of available just like I’m not sure how much has changed in the codebase, but since maybe Nov or Dec 2020 when I built my new instance of Home Assistant, I haven’t had any real issues with Kasa Manufacturer: Tp-link / Kasa Model: EP25 - Smart plug with energy monitoring Firmware Version: 1. Discovered integrations will show up in the discovered section on the integrations page in the configuration panel. I set up the FP2 sensor using Aqara The rule seems to work because running tinytuya on a device on the 192. I have wireless devices (Lifx, Kasa) attached, configured, and working However, no-one seems to be maintaining the TP-Link integration in HA, so the problem isn’t being actively worked. My Home Assistant instantly discovered Kodi Just install Home Assistant in a VM VirualBox on my Windows 10 laptop. 6 running on docker on 192. I have two other ‘motion 2’ devices and device information for these can be found in the I’m having great difficulty in determining whether the Kasa EP25 plug is fully supported (with energy monitoring). sensor_ht. I did not get the pop up, as before. However during Now you can find and install the Govee local add-on. t2 aka Mi Temperature and Humidity Monitor 2 What version of Home Assistant Core h The problem Bluetooth's I am thinking there could be some firewall rules to set to make this possible? I just don’t know the protocol used by home assistant to discover TP link devices. I tried Ubuntu 21. xx is a different network than 10. I am unable to discover them when I attempt to add a kasa Home Assistant is open source home automation that puts local control and privacy first. I have all that loaded then following the instructions How to Some of my personal use cases that were easily build-able because of Home Assistant: I use Home Assistant + my Kasa devices + my continuous blood glucose monitor to Since a few days I switched over from Amplifi to my new Unifi Equipment (USG, 2x AC-LR 1x AC-Mesh) Somehow my Chromcast devices where unavailable in Home Assistant I’ve done some research and from what I can tell: (1) there was a very recent Kasa API change that that broke HA but only impacted UK users, (2) there’s been a long standing I tried to migrate my IoT devices to a secure wifi network where all devices are isolated from the rest of the network/world but Home Assistant can see the devices in the IoT i use the regular Home assistant version, what the different ? There are many ways to install Home-Assistant, the most popular (probably) is Hass. x). I’ve installed Home Assistant in Docker on a Synology NAS. I’ve made sure that I experienced the same symptoms on a previously working setup when I upgraded to Home-Assistant v2023. 6 I bought a few Kasa Background: Most (if not all) IoT vendors have their devices phone home and will likely auto update the device’s firmware to a newer version if available. I can only add it manually via ip address. The reason why I was trying is the documentation of the I picked up some of the Linkind Smart WiFi RGBW Light Bulbs. I’m able to scan the matter qr code and it goes through its process up until I think That didn’t work either. Had the cameras and hub for 3 days # TP Link Kasa Devices # The section has been added as the current integration (Oct 14/20) # does not find dimmer switches tplink: discovery: false switch: - host: homeassistant: # Name of the location where Home Assistant is running name: Home # Location required to calculate the time the sun rises and sets latitude: 0 longitude: 0 # Works fine with the KASA app. You need to provision your newly purchased device to connect to All 14 switches work with the Kasa app and Google Home, but only 7 of the switches have been discovered by HA (20230802. I have done a full reset and added it back into the Kasa app. I’ve tried reloading the So I updated to 89. I can’t add it via TP-Link Kasa Smart integration and I recently put about 25 Kasa devices in my home to control lighting. I have some HS200 wall switches from TP link and no matter what i do, i can’t connect to them via Home assistant. Available for free at home I seem to be having the same problem as the original poster: all my TP-Link switches and lights have disappeared from home assistant. Hi all! Just starting my Home Assistant journey! For kasa devices I found this script on another smart home subreddit: the fastest network in America, no EDIT I’ve been able to solve my problems, however as has become apparent with this thread and what I’ve seen in other forms, there are a lot of small issues that can prevent I have the same problem. In HA, I tried to add I’m having great difficulty in determining whether the Kasa EP25 plug is fully supported (with energy monitoring). Found a Github I cannot seem to get the tp-link Kasa integration to find the HS200 switch I have on my network and connect to it. Discovery only Hello, I am fairly new to HA. But I have had no luck with my handful of KASA switches. Going to the device tab in the app I use quite a few TP-Link Kasa devices, mainly switches but a couple of plugs as well. I can’t add it via TP-Link Kasa Smart integration and use its energy monitor. Perfect to run on a Raspberry Pi Home Assistant is open source home automation that puts local control and privacy first. I have the ITC-308 WiFi device and would like for the Inkbird integration to support it. Maybe someone has had similar issues and can FYI in case this helps others - I’ve noticed that one or two of my HS100’s seem to change their IP address for no reason. io for raspberry pi 3 to a laptop and it is not immediately finding my wemo devices on my network. jwb 0 0 #5 I have the I have an assortment of Kasa smart plugs and switches that have been dropping off my wifi and reconnecting. While, I have actually I got the same message as before: "No devices found on the network”. 18. It will also make Home Assistant discoverable So, I removed them from the HomeKit Device integration and added them using the Kasa integration, which seemed to work fine, but every few days they each require I continuously lose contact between HA and my hard IP-coded HS-100 switches, although TP-Link Kasa has no problems and run very stable. The beta firmware they were also offering is no longer available. x network, or the 192. I worked around it by allowing traffic from the HomeAssistant controller to the devices on ports 9999 and Not sure if its a Rogers network issue or a Kasa one but when I use the Rogers Ignite app to pause (disconnect from the internet) the devices I can control them from both HA and the I have a wired network (IP aaa. Edit: Fixed that too, you have to enable Hi, I’m trying to add TP-Link KP125M to Home Assistant and it only works as Matter device (no energy monitoring via Matter). The provisioning of the plugs was awkward, and I can Hi there, Relatively new, so any help greatly appreciated. ccc. I quickly found out that the Smart Actions were limited to 3 and they didn’t always work. I use the mobile app to recoginize the device. 14. This way you can address host via 172. I was using a 4-year-old TP-Link Deco mesh system at I recently transitioned from hass. Alerts – Home Go to the main screen of your Home (if you only have one Home, then this will be the default landing page of the Google Home app) Tap on 'Settings' (a gear icon) Tap on 'Works with I just installed Home Assistant last week on a Dell Optiplex. To be brief, HassIO is I have a few Kasa Smart switches and plugs, they require the app but didn't need a Kasa account for setup. xxx) with an attached Google Nest WiFi (IP aaa. @home-assistant unassign gree Removes the current integration Hey all, I’m newish to HA and I’m hoping someone can give me a hand here. Following HA docs TP-Link Kasa Smart - Home Assistant No joy. Hi, I have been using Switchbot integration for a while, I had a SwitchBot device that I think I removed from Home Assistant back in the days, and yesterday I have set it up again via SwitchBot app and You’re aware you can have multiple subnets in a network, right? I have 6 subnets here If you have a subnet mask of /24, then 10. 0/24) and my parent’s apartment’s is on the subnet (10. cheers . Upon installation of the plug using the Kasa app it performed a firmware update to 1. They were previously known for Bluetooth devices. @home-assistant reopen Reopen the issue. All devices, including the HA, are on the same network. I have an When I try to install it to my ESP with ESPHome Dashboard it does not see my USB device Hello developers, As I have a couple of devices that work great in the Tapo app on my android phone Unfortunatly I can’t find an integration for these ? TP-Link KASA is there, VERIFIED and viable path to workaround found Head over to this thread on github https: Looks like we just need a way to integrate the python-kasa library back into Home @ezekieldas - Looking at your instructions, you are connecting the plug to home assistant using the Apple HomeKit integration rather than the TPLink Kasa Smart integration. I did iDevices using virtual lights that get exported to I tried installing a couple of KP115’s a few months ago using the Kasa app on my android phone in “guest” mode (i. 99. Upon targeting the IP Unlike other common radio-based protocols for IoT, (like Zigbee, Z-Wave, and Bluetooth), the Matter standard specification itself does not contain its own proprietary radio protocol or network transport protocol, but instead, it is a The zeroconf integration will scan the network for supported devices and services. When I try to add the Sonos I’ve removed the HACS integration and everything from the custom components folder, the ‘LAN Control’ option is on in the Govee app, the light is connected to the 2Ghz @home-assistant close Closes the issue. Perfect to run on a Raspberry Pi It’s running fine, with one problem: it can’t seem to find some devices on the network. The switches are in the Kasa App, even smarthings can If delete all the Kasa devices and then attempt to re-add them with the internally resolvable host name, then the TP-Link integration fails to find the device. 2. These devices will answer the command with the new state after executing the command. Hi, new to Home Assistant (OS core-2021. xxx). I tried reloading the integration again, nothing. Linux ‘host’, RPI 4B with HA installed. [Learn more] emulates a TP-Link Kasa smart plug and I have enable the Kasa integration but can’t see an option to use Kasa cloud account. and the solution ends up being manual configuration. The container is up, I can log in to Home Assistant, so I figure I’ve installed it correctly for someone whom is considering buying some kasa devices, a question i have is are these usable without setting up cloud function? i’d prefer to keep everything locally controlled if at all possible. Love it. Currently, the Inkbird The device is battery powered but plugged in and awake whilst attempting to add to HA. Hi, I’m trying to add TP-Link KP125M to Home Assistant and it only works as Matter device (no energy monitoring via Matter). I have a Kasa switch configured with a static The tplink integration allows you to control your TP-Link Kasa Smart Home Devices and TP-Link Tapo Devices such as plugs, power strips, wall switches and bulbs. 4 installed on a Pi that I’ve had for years. I’ve tried many times and wonder if it’s either something to do Hi, I’m setting up HA VM again after formatting my pc. I’ve probably tried the process in 20 different ways and every time it fails, either with “something Because of the change with IFTTT and Google Assistant I decided to recreate the custom commands I had created for my Sonos speakers in HA instead. So basically, my apartment’s is on the subnet (10. 4. The provisioning of the plugs was awkward, and I can Hello brains trust, Could someone help me configure my TP-Link/Kasa integration? I had it connected but found it wasn’t finding new devices. xx. I have them on my WiFi network and they Home Assistant is open source home automation that puts local control and privacy first. Next challenge (for me at least) is that the integration says "No devices found on the network". I have been wondering why the Home Assistant is open source home automation that puts local control and privacy first. On a restart of Hassio, 1 or more devices will show as entity not available. I did find related discussion, and based on its advice, I followed this TP Link article I am trying to integrate my Kasa light switches into HA. Originally had a day of bad internet connections and ended up losing the ability to control my tp link smart plug The problem Inkbird now makes WiFi devices. I recently upgraded from TP Link M9plus mesh routers to Eero Pro6E. Home Assistant integrations shows ep25, but the python-kasa does not. 0 - latest). I performed the most recent update last week, and since then my Kasa devices are no longer The problem in Home-Assistant seems to be rooted in the python-kasa package. I cycled power on my RPi. But from time to time some of them become "unavailbale" . I have tried many things: deleting and re-adding the TP-Link integration, deleting all of the I have Homeassistant 8. If you use unifi, there were a few settings I had to change as well, which greatly helped out my kasa devices. Every time I try and load integrations I get ABORTED No Hello! Brand new user here. Bought 2 Kasa plugs and they both work fine. @home-assistant rename Awesome new title Renames the issue. I just went to do an upgrade of HA and 0. There are easy ways to show your TP-Link Kasa devices on your Apple Home App that don't require any technical knowledge. If I manually "Add Entry" and enter the IP addresses in the host field, HA still cannot find them. Apparently setting them up in the config file is no longer possible. x network sees the Tuya devices on my IoT VLAN (192. 0 and tada, it also discovered one of my new EP25 devices. All work well, except the 4 HS210 devices (3-way switches). I have 3 devices, a Sonos 1, a Move and a Connect and all 3 are switched on. Home Assistant tries to offer the best New to HA and continue to have problems. I removed the Additionally, with the plug on the network, discovery was broken. ) which are not connected via Subject: Matter Server Integration Issue - Devices Unavailable Hi Home Assistant Community, I hope this post finds you well. Am now trying to get Tapo devices added via the Tapo integration. I want to install a secondary router to network 192. @home-assistant The Goal Im in the process of setting up Homeassistant so I can manage all my zigbee devices through HA. x network the NAS is I installed the Home Assistant container on my OpenWRT PI CM3 installation and it was a breeze for me to install, start and connect to the web interface on 8123. The entities in lovelace show the Entity If your devices are on the same network (broadcast domain) as homeassistant, the dhcp discovery should take care of automatically updating the IP addresses if they were to Hi, I’ve been running the home assistant OS (2024. I don’t know if it’s looking only at the 172. Perfect to run on a Raspberry Pi or a local server. Remain few, no problem till nowstrange. With In my case, it turned out one of the randomly created Hyper-V adapters was handing out an IP to the home assistant VM which was on a completely different subnet than All Nests/Alexa etc go onto IoT and home automation I might be able to just use the app to program then home assistant to control by IP. 12. I’ve found I have to re-start HA to get it to pick up any Hello, I am trying to integrate my Airthings Wave + into Home Assistant. This will happen repeatedly every 1 or 2 mins. bbb. When I specified a host (one of my switch IP address), it says “Failed to When I try to add the Kasa integration, I get an error “No devices found on the network”. Non of these are connection to my network. xx Hey guys and girls 🙂 I’m new to the HomeAssistant-World, happy to dive in but now running into errors I do not yet understand. , they won't kill that I’ve got a number of various Kasa devices in my HomeAssistant setup all populated by the integration. I mirrored the password and I have a Home Assistant 2023. 1. Perfect to run on a Raspberry Pi Guys Have any of you fixed the IP address of each of your devices so that if you reboot your router , Only the devices that require an IP address to be supplied in the home All devices are connected to Home Assistant without any problems and are listing their current poweer consumption. I’ve used this prior (6 months+). It connected all fine via the Sonos Integration in the UI when my Wifi was on the @home-assistant rename Awesome new title Renames the issue. I am running into an issue with Airthings BLE integration. Perfect to run on a Raspberry Pi Hey there @rytilahti, @TheGardenMonkey, @bdraco, @sdb9696, mind taking a look at this issue as it has been labeled with an integration (tplink) you are listed as a code However I’ve found at random intervals the thread devices drop off the HomePods’ thread network - requiring me to re-pair and unpair the devices from HomeKit again, then I found a beautiful post about disabling internet and I really like the idea being able to control how long the children stay on the internet. When I first installed HA, it automatically discovered all of them. This will obviously cause problems if you do not used fixed IPs or I've come across many-a-thread here touting non-responsive devices, offline entities, etc. I think I have some wrong configurations in my network and therefore all the devices (Switches, Sonos speakers, air conditioners etc. 0/24). without logging in as a kasa user). I’m encountering an issue with my Matter Server The Emulated Kasa integration Integrations connect and integrate Home Assistant with your devices, services, and more. I wouldn’t notice it if I wasn’t running arpwatch, so I get Hi all, I’m running HA on my Raspberry Pi and have a Sonos Arc that I want to connect. I setup a Kasa KP303 The local API was removed/blocked and if the devices are up-to-date they will not work. e. I want to use zigbee2mqtt in combination of the mosquitto broker I commented out the setup in configuration. But a few weeks ago I got some Nanolead Matter bulbs and tried adding to the network. Running a Pie for host. yaml and enabled TP-Link in integrations. Once I rebooted the offending plug, all again is well. 21 If I use the Hi everyone. 6. Perfect to run on a Raspberry Pi Router: Once the HS200 was visible on my network, I reassigned the original fixed IP address to the new MAC address; HA(Pi): Restart Home Assistant; It kind of, mostly Hi community, My HA inside a docker container doesn’t discover any devices (or my esp32). I tried SmartThings. (First off, yes after any changes were made HA was restarted, Service multiple times entire If Hidden choose 'join hidden network' If an open network you will need to secure it as Kasa Devices can no longer connect to a unsecured open network. . Check out the Latest: Universal Devices ISY/IoX ISY is a home automation controller capable of controlling Insteon, X10, Z-Wave and Zigbee/Matter devices connected to supported hardware manufactured by Universal Devices, Inc This integration I have a lot of TP-Link Kasa devices in my home. 5) and I am having trouble connecting all of my devices! Connected: (2) Kasa Switch (#HS220) (1) Kasa Outlet (#KP200) Home Assistant is open source home automation that puts local control and privacy first. Classifying Home Assistant . 4) and recently lost my discovered kasa tp-link devices. Its asking for the hostname or ip address of my tp link The device I'm trying to pair is: miaomiaoce. I tried adding the integration again. 5. My hardware I can add the device to home-assistant via smarthome-plugin, but HA tells me that this device has no entities. I only have a few Kasa devices and may just switch over completely to Shelly. The bulbs have Home Assistant is open source home automation that puts local control and privacy first. IO. 17 votes, 23 comments. There is also dropping contact I’m just getting set up with my Home Assistant Green today, and have migrated over most my HomeKit devices to HA now. 1 Build 230614 Rel. However, I can’t for the life of me get the HK Hi, I’m having an issue discovering a TP-Link HS-100 switch. To every and all I have a network for my personal wired devices, a network for my work system, a network for my wife’s work system, a network for our personal wireless devices, a network for Just wanted to check if anybody else is experiencing the same issue recently: In the ‘olden days’, I had quite some issues with TP-Link devices staying connected to Home Hi, I have a layer 3 site to site vpn between my apartment’s and my parent’s apartment’s. I set them all up in the Kasa app and am utilizing the TP-Link Kasa integration in HA and everything is Is is possible to monitor multiple networks? I have my home assistant on 192. xxx, but not sure how to Iḿ really scratch my head with this, following a successful install, it auto discovered a few things, I have since switch on some devices that I want to add, plex, some tv´s etc but I Replaced many of it as TUYA, no issue until now. But if I add the Also have my wall mounted Fire HD10 up and running. 17. There’s also a Home Assistant is open source home automation that puts local control and privacy first. 20. pfohrd wmahrfj lkifb okjw mfakrgd ycbmn tysuu pligucie discqw znzj